Technel Engineering Appointed Canadian Rep for Dewetron

Established in 1989, DEWETRON is a manufacturer of Test & Measurement systems and sensor signal conditioners. DEWETRON Data Acquisition Systems are designed to record from a few channels to thousands of channels of vastly different signal sources gaplessly and in perfect sync, at one location or distributed across locations up to 100 meters apart. DEWETRON [...]

By |2021-04-07T14:24:43-04:00March 30th, 2017|General News|0 Comments

Precise 2000 Amp DC Supply

Guildline 6623A-PCS2000 Because power transmission using DC voltages over long distances and under water is more efficient than A/C transmission, there is an increased demand for a precise high current source for testing cables and monitoring instrumentation. With the growing advent of off-shore wind farms and far North hydroelectric facilities such as Manitoba Hydro, the [...]

By |2017-01-16T14:36:06-05:00July 18th, 2016|General News|0 Comments

Pneumatic Pressure and Vacuum Calibration Bench

OPG Darlington Maintenance Recently delivered to OPG Darlington is a four station pneumatic pressure/vacuum calibration bench. For the Pressure Loops, the bench consists of 3 Automatic Pressure controllers with ranges of 500 psig, 100 psig and 15 psig. For the Vacuum calibration loop, an Edwards high performance vacuum pump is used as the source which [...]

By |2021-04-07T14:24:43-04:00July 18th, 2016|General News|0 Comments

Say What? Mensor Announces New Automatic Pressure Controller

Mensor Corporation, a subsidiary of WIKA, has announced the release of the next generation of the popular CPC 6000 Pneumatic Automatic Pressure Controller. The new Mensor 6050 maintains the trend setting, easy front door pressure transducer accessibility. Open the front door, unscrew the pressure transducer assembly holding screw with your fingers and remove the transducer [...]

By |2021-04-07T14:24:44-04:00April 26th, 2016|General News|0 Comments

PHT Hydrostatic Pressure Test System

Technel Engineering Inc. has designed, built and trained operators on a cart mounted, custom pressure calibrator for pressure testing the Primary Heat Transport system. Technel has supplied a PHT Test System for the recent refurbishments at Bruce Power and Pt Lepreau. After any modifications to a PHT configuration, the CNSC (Canadian Nuclear Safety Commission) requires [...]

By |2021-04-07T14:24:44-04:00April 7th, 2016|General News|0 Comments

Go to Top