App Notes

|App Notes

P-10 Regulator for Nuclear Industry

TECHNEL Engineering designs custom Pressure Boundary Tools to meet the specific requirements of your application then manufacture, test and provide on-site training. Since Technel Engineering Inc. has TSSA Certificates of Authorization QA 02458 and QA02459, all customized tools can come with a CRN (Canadian Registration Number) and if required an ESA (Electrical Safety Authority) or [...]

By | July 5th, 2018|App Notes|0 Comments


Technel designed, built, tested and provided on-site installation assistance for an all pneumatic pressure calibration bench which was recently delivered to a large Ontario electric utility. Designed for use by technicians, who will be sitting or standing, the 12 foot long stainless panel and bench incorporates all the necessary calibration equipment to handle calibrating instruments [...]

By | July 5th, 2018|App Notes|0 Comments

Refurbishment Product PHT Hydrostatic Pressure Test System

Technel Engineering Inc. has designed, built and trained operators on a cart mounted, custom pressure calibrator for pressure testing the Primary Heat Transport system. Technel has supplied a PHT Test System for the recent refurbishments at Bruce Power and Pt Lepreau After any modifications to a PHT configuration, the CNSC (Canadian Nuclear Safety Commission) requires [...]

By | July 5th, 2018|App Notes|0 Comments

Total Flight Test System Solutions

Total Flight Test System Solution App Story Teletronics - a Curtiss-Wright company is the world’s leading total system solution provider for defense and commercial aerospace test applications. TTC provides a wide range of high-performance, reliable, modular, programmable, miniaturized and resilient Commercial Off The Shelf (COTS) hardware and software products. Our products are the ideal solution [...]

By | July 5th, 2018|App Notes|0 Comments

Miniature Pressure Scanner for Flight Test

Scanivalve’s MPS4264 can be used in flight test, automotive, wind turbine, wind tunnel, inlet distortion, and engine test applications where temperatures tend to vary and are often extreme. About the TCU In applications where these temperatures may exceed ambient conditions we offer a TCU (Temperature Control Unit) as seen in Figure 1. This will provide [...]

By | May 29th, 2018|App Notes|0 Comments